Electrets
Electret: noun Physics
a permanently polarized piece of dielectric material, analogous to a permanent magnet.
Electrets are devices with a permanent electrical charge. In the past, orgonauts have experimented with trying to get significant amounts of electricity from this sort of technique. I don't know of any great successes in this area. I have not played around with this, and know nothing about it other than what follows.
What follows is some info from someone else who claims that orgonite made this way is super-potent.
I'm not so sure about that, but here's the info in case anyone wants to experiment:
* * * *
Here is some info and schemes for how to make the high voltage circuit! It is used in negative ion generators http://www.goldmine-elec-products.com/products.asp?dept=1221 (actually the NIG is actually nothing else but the High Voltage generator).
The reason they call it negative is that the output on the final needle is negative, and to make it positive just reverse the polarity of the Cockroft-Walton chain.
Also the more you have steps for the chain (capacitor/diode) the more voltage you will have on the output. You can actually create almost enormous voltages with a 9v battery. Don't forget the resistors - otherwise u will zap urself ! I did with resistors and when it gets to 15KV it tingles a lot!
This is my favorite explanation of this and anyone can make it. It get's a little bit expensive but the final result is amazing! Imagine if you hook this up w/ a flat wave of 15hz frequency.
There is also a phenomenon I noticed, apparently if you let the HV discharge or "SPARK" though the Orgonite - the flat wave becomes triple decker! there are 3 flat lines from this "spark" but very sporadic, if u apply through the orgonite the wave will become nice and smooth!! You can actually see the wave transmission on regular antenna TV screen and with the sound too! (how do I know its a flat wave- this transmission goes through walls! only the flat waves go through walls or anything actually) (If you do this during curing process, it makes the orgonite retain this emittance forever!) As the epoxy cures and solidifies even more- the wave becomes crisper and smoother ( u can see it on tv!) also depending on the length of the spark the waves also can be modified! If the spark is short distance the waves are more smoother and fill up the space even more evenly(less gaps between the wave's pulses).
Here is the explanation how to make the NIG but basically it is High Voltage generator without electrical current (the current is not moving, so becomes radiating static).
And here is the info about how to make high voltage from low voltage.
The electret was invented before WW2 in Germany. It was material used in magnetic/wave drives for SS UFOs later. The info was never retrieved on how to make one or make from what, but recently Japanese scientists found it out -simple apparently!
I thought that it would be a neat idea to create Orgonite using the technique for making an electret! During the curing process all you need to do is connect + and - (ground) to the Orgonite Form (top + bottom -). The epoxy will cure and will retain the charge - making orgonite many times more powerful (or so I think). Also since most epoxies have wax in them it is even better! (electret is made from wax!)
I also made the spark on top of the orgonite and placed a powerful magnet above the orgonite during curing! The only thing to look out for is the sparks inside the orgonite! the spark will burn through the solidified material!! so once it starts to become hard make sure no sparks are present inside the orgonite material! (outside of it is fine.) I believe the materials (metals) retain loose electricity from one end, accumulate it and pass it on!
Interesting results/observations:
I took it with me to work one day. I was so energized while walking - didn't even run out of breath or was tired when got home! While walking I had a lot of weird looking people almost run into me and then as if I had an invisible sphere walk aside! most of those people that ran into me were the "bad" ones! I even was able to feel it! When you measure it w/ the voltmeter it shows where is + and - located on orgonite!!! and the final is that when I was in totally dark room - 0 light, I closed my eyes next to it and from the inside I could see bright blue/white light hitting me from the orgonite! opened and closed my eyes many times- to make sure! every time - light! The light as I understood was in spherical form! (when turning around w/ eyes closed I found the spherical border- actually passed though it seeing it inside my closed eyes! )
Same techniques work w/ any orgonite!! especially w/ coils inside!!! Plus don't forget since the epoxy retained the charge its molecules are vibrating (electrically) - therefore making all materials become electric and vibrating aaaaaand the quartz crystal starts "screaming" due to electricity from the surrounding materials! (since we know if we apply electric current to the quartz it makes its own electricity as a response! therefore it will "ring" and radiate even more then usually!
Above is my theory but it looks and felt like it works.